|
MR-MANUFACTURER
Atlantis Products, Inc.,
METALCO System
8185 S. Cass Ave., Darien, IL 60561
Tel: 630-971-9680, Toll Free 877-METALCO (638-2526), FAX
630-971-9860
e-mail: info@fence-system.com
Metalco® offers technical assistance to architects, engineers,
contractors, owners and facility managers regarding the design and installation
of our products. We have provided many custom solutions for unusual situations.
Let our experienced engineers assist you to determine the optimum design
for your project.
PP-PRODUCT
PRESENTATION
Electro-forged welded steel fencing that is galvanized and powder
polyester coated. The panels are made of an electro-forged wire
mesh. The vertical rods are placed (sandwiched) between two horizontal
rods. The rods are electro-forged welded at each crossing. The standard
panel length is 8'-3". The TWINBAR panels are available in
different mesh sizes and different material strengths. The panels
are prefabricated for heights from 2' to 8'. Heights of more than
8' are accomplished by combining panels with a different or equal
height. Special panels for corners with different angles are available
on request. The posts are made of square tubular steel of different
sizes depending on the required overall height. The panels are mounted
onto the front of the posts with pre-assembled mounting brackets
or with a pre-assembled lock bar. All post-panel connections are
utilizing a patented nylon setting to reduce rattling noise caused
by wind, vibrations or other sources. The mesh size is designed
according to code. A sphere of 4" cannot pass through the openings.
TWINBAR "Fortress"
Mesh size 2"x 8" (50x200mm) center Vertical rods are dia.
1/4" = gauge-4, (6mm), 2 Horizontal rods are
dia. 1/4" = gauge-4, (6mm) Panel Width and Post Spacing 8'-3"
(2510mm).
Fence Types and Height available:
|
Twinbar "Fortress" |
|
|
Fence Height |
No.
of Panels and Heights |
Fence Height |
|
2'-0" (630) |
1x 2'-0" (630) |
2 3/8" x 1 5/8"
(60x40). w. lockbar |
|
2'-8" (830) |
1x 2'-8" (830) |
2 3/8" x 1 5/8"
(60x40). w. lockbar |
|
3'-3" (1030) |
1x 3'-3" (1030) |
2 3/8" x 1 5/8"
(60x40). w. lockbar |
|
4'-0" (1230) |
1x 4'-0" (1230) |
2 3/8" x 1 5/8"
(60x40). w. lockbar |
|
4'-8" (1430) |
1x 4'-8" (1430) |
2 3/8" x 1 5/8"
(60x40). w. lockbar |
|
5'-3" (1630) |
1x 5'-3" (1630) |
2 3/8" x 1 5/8"
(60x40). w. lockbar |
|
6'-0" (1830) |
1x 6'-0" (1830) |
2 3/8" x 1 5/8"
(60x40). w. lockbar |
|
7'-3" (2230) |
1x 7'-3" (2230) |
2 3/8" x 1 5/8"
(60x40). w. lockbar |
|
8'-0" (2430) |
1x 8'-0" (2430) |
2 3/8" x 1 5/8"
(60x40). w. lockbar |
|
10'-0" (3060) |
1x 4'-8" (1430) + 1x
5'-3" (1630) |
3" x 1 5/8"
(60x40). w. lockbar |
|
12'-0" (3660) |
1x 6'-0" (1830)
+ 1x 6'-0" (1830) |
3" x 1 5/8"
(60x40). w. lockbar |
|
15'-0" (4490) |
1x 7'-3" (2230)
+ 1x 7'-3" (2230) |
4" x 1 5/8"
(60x40). w. lockbar |
|
19'-6" (2430) |
1x 7'-3"
(2230)+1x 6'-0" (1830)+1x 6'-0" (1830) |
4" x 1 5/8"
(60x40). w. lockbar |
Security Options
Security options such as angled tops, barb wire attachments,
electrifications and sensor wiring are avaiable on request.
(
) denotes metric
AI-ASSEMBLY, INSTALLATION
Fence posts are of sufficient length to allow for setting into concrete
footers. Posts with flanges (base plate) are also available. The
fence post spacing is 8'-3" (2510mm) apart on center. However,
drawing will call out special spacing when required or to adjust
for end pieces. In-ground posts may be set in concrete into hole
12" (303mm) in diameter for terminal posts and 10" (254mm)
in diameter for intermediate posts. Concrete should be 6" (152mm)
deeper than posts. Deeper and wider settings may be necessary in
some locations. It is recommended that the fence be temporarily
erected using 2"x 4" supports. After the fence is plumb
and level, pour concrete grouting into holes. The panels are mounted
onto the front of the posts with pre-assembled mounting brackets
or with a pre-assembled lock bar. The panels simply snap into the
bracket or lock bar. The brackets or lock bar bolts shall be tightened
with ratchet and hex sockets or with a power tool and hex sockets.
Corner can be made in the field by simply cutting the horizontal
rod with a bolt cutter on one side of the panel. This allows the
panel to be bent to any angle required.
Installation of this fencing system is quick and easy.
Posts
can be attached to the structure below in several ways: Using the
recessed method, posts are set into cored holes or sleeves and anchored
with non-shrink grout. Using the surface mount method, mounting
plates are attached to each post and bolted to the structure below
utilizing expansion bolts or other fastening systems. Using the
face mount method, the posts are mounted to the face of the structure
typically below the level of the walking surface.
(
) denotes metric
MF-MATERIALS,
FINISHES
Thermosetting Polyester Powder Finish
Metalco® Fence and railing panels are protected by what we believe
is the best finish available today. The computer controlled hot-dip
galvanizing and the thermosetting polyester powder finish give the
Metalco® System the highest possible protection against rust
and corrosion. The advanced polyester powder coating technology is
environmentally friendly (no solvents, lead free) and offers a large
color selection.
In
the interest of improving quality and design, Atlantis Products, Inc., Inc. reserves
the right to change specifications without prior notice.
Colors
Eight standard colors are available: white, black, blue, green,
red, yellow, gray and brown. Additionally, we offer an almost unlimited
selection of custom colors. The polyester powder coating is available
for all our products including oversized parts, i.e. large gates.
15-Year
Limited Warranty
Metalco® fencing systems are free from defects in material and
workmanship.
The polyester-coated galvanized metal is guaranteed not to rust,
crack, peel or blister for a period of 15 years. Accidental damages,
defects resulting from improper installation and damage from vandalism
or abuse are not included. Warranty is limited to prorated value
of the coating, not to exceed the original value of the coating.
AC-AVAILABILITY,
COST
Availability: Metalco® fencing is carried in stock in large
mats or prefabricated panels. Jobs are fabricated and coated before
being shipped throughout the United States.
Cost: Costs are quoted on a per-job basis due to varying requirements
of each project. Costs may be obtained by calling:
Tel: 630-971-9680
Toll Free 877-METALCO (638-2526)
FAX
630-971-9860
WEB SITE: www.fence-system.com
E-MAIL: info@fence-system.com
OM-OPERATION, MAINTENANCE
The advanced coating method supplied on the Metalco® fencing
systems requires no maintenance.
|
