|
PP-PRODUCT
PRESENTATION
The Grigliato railing system utilizes the strength and flexibility
of the Grigliato panels from Metalco .
The Grigliato System enables us to offer an affordable modular system,
which is practical, durable and sturdy. This unique railing system
provides a wide variety of design solutions. It can be brightly
colored and configured to be a design feature or it can blend inconspicuously
with the surroundings.
The
Grigliato panels are ideally suited for retrofitting existing railing
systems, which are not in compliance with current building codes.
Grigliato
is an electro-forged welded steel panel. The panels are hot-dip
galvanized according to ASTM A 123. Also available as an option
is our extremely durable polyester powder finish.
Fencing
System
Fence posts are of sufficient length to allow for setting into concrete
footers. Posts with flanges (base plate) are also available. The
recommended standard fence post spacing is 78" (2OOOmm) apart;
however, drawings will call out special spacing when required. In-ground
posts may be set in concrete into a hole 12" (303mm) in diameter
for terminal posts and 10" (254mm) in diameter for intermediate
posts. Concrete should be 6" (152mm) deeper than posts. Deeper
and wider settings may be necessary in some locations. It is recommended
that the fence be temporarily erected using 2"x 4" supports.
After the fence is plumb and level, pour concrete grouting into
holes. Installation of some railing systems and customized products
may vary.
Post Types and Heights
The standard post is made of rectangular tube 2-3/16" x 1-5/8".
The posts have threaded 3/8" inserts to receive 3/8" bolts. The
panels are bolted to the posts. Spacers provide spacing adjustments.
Standard Heights available are 4', 5', 6', 8'. Extended heights are
available by using our rectangular 3' x 1-5/8" posts. Extended
heights are 10', 12', 16'. Fence heights exceeding 6' or 8'
will utilize a stacked panel arrangements to keep the panel sizes
manageable.
Optional available for heights for up to 6' are flat bar posts
2-1/2" x 1/2". These posts have attachment holes to receive
fasteners. Posts are attached by utilizing 3/8" threaded hexhead
bolts and nuts.
Click here for panel type overview
Grigliato
Panel Types
The Metalco panel styles listed below are available. Standard
Heights are 4', 5', 6', 8'. Standard width is 78". Panels can also
be provided in any custom size required.
Grigliato
"A"
Characteristics: Widely used for fence and railing designs. Hard
to climb rectangular mesh
Applications: Suitable for a vast range of applications. It can
be used for prestigious projects as well as for high security needs.
Applications include sports, schools, institutional, military, urban
and more.
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"A" by Atlantis Products, Inc., Tel. 800-708-2526. 2 7/16"x
5 3/16" (62x130) mesh, 31/32"x 1/8" (25x3) main bar,
3/16" (5) cross rod. Galvanized to ASTM A 123 and/or polyester
powder coated.
Grigliato
"B"
Characteristics: Square mesh style. Very sturdy and hard to climb.
Clean lines
Applications: Fencing and railing. Very versatile for commercial
and residential use. Suitable for decorative applications (screens,
dropped ceilings) as well as for railing applications.
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"B" by Atlantis Products, Inc., Tel. 800-708-2526. 2 7/16"x
2 19/32" (62x65) mesh, 31/32"x 1/8" (25x3) main bar,
3/16" (5) cross rod. Galvanized to ASTM A 123 and/or polyester
powder coated.
Grigliato
"C"
Characteristics: Square mesh style. Light in appearance with good
"see through" capability.
Applications: Fencing and railing. This model is well suited for
applications which require a light and inconspicuous design with
good "see through" capability. Also suitable for interior
decorating (ceiling, divider, etc.).
Limitation: This model is easy to climb.
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"C" by Atlantis Products, Inc., Tel. 800-708-2526. 3 15/16"x
3 15/16" (62x65) mesh, 31/32"x 1/8" (25x3) main bar,
3/16" (5) cross rod. Galvanized to ASTM A 123 and/or polyester
powder coated.
Grigliato
"D"
Characteristics: Rectangular mesh style. Very sturdy and hard to
climb.
Applications: Fencing and railing. Similar mesh size as Grigliato
"A", extremely sturdy design for wide spans or high security
applications
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"D" by Atlantis Products, Inc., Tel. 800-708-2526. 2 7/16"x
5 3/16" (62x130) mesh, 1 3/16"x 5/32" (30x5) main
bar, 1/4" (6) cross rod. Galvanized to ASTM A 123 and/or polyester
powder coated.
Grigliato
"E"
Characteristics: Very small mesh, widely used in applications where
a screen effect is wanted
Applications: Screen walls, railings, back drops.
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"E" by Atlantis Products, Inc., Tel. 800-708-2526. 1"x 5 3/16"
(24x130) mesh, 31/32"x 1/8" (25x3) main bar, 3/16"
(5) cross rod. Galvanized to ASTM A 123 and/or polyester powder
coated.
Grigliato
"F"
Characteristics: Very small mesh, widely used in applications where
a screen effect is wanted.
Applications: Extremely small mesh for special effects. High security
fence and railings, does not allow the passing of objects (i.e.
weapons) through the mesh. Used at airports, correctional facilities
and for window protection.
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"F" by Atlantis Products, Inc., Tel. 800-708-2526. 1"x 1"
(24x24) mesh, 31/32"x 1/8" (25x3) main bar, 3/16"
(5) cross rod. Galvanized to ASTM A 123 and/or polyester powder
coated
Grigliato
"G"
Characteristics: Widely used for fence and railing designs. Hard
to climb rectangular mesh.
Applications: Fencing and railing. Suitable for a vast range of
applications. It can be used for prestigious projects as well as
for high security needs. Applications include sports, schools, institutional,
military, urban and more.
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"G" by Atlantis Products, Inc., Tel. 800-708-2526. 2 3/8"x 4"
(62x100) mesh, 31/32"x 1/8" (25x3) main bar, 3/16"
(5) cross rod, 1"x 3/16" (25x4) frame bar. Galvanized
to ASTM A 123 and/or polyester powder coated.
Grigliato
"H"
Characteristics: Square mesh style. Very sturdy and hard to climb.
Clean lines.
Applications: Fencing and railing. Very versatile for commercial
and residential use. Suitable for decorative applications (screens,
dropped ceilings) as well as for railing applications.
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"H" by Atlantis Products, Inc., Tel. 800-708-2526. 2 3/8"x 2"
(62x50) mesh, 1"x 1/8" (25x3) main bar, 3/16" (5)
cross rod. Galvanized to ASTM A 123 and/or polyester powder coated.
Grigliato
"J"
Characteristics: Square mesh style. Light in appearance with good
"see through" capability
Applications: Fencing and railing. This model is well suited for
applications which require a light and inconspicuous design with
good "see through" capability. Also suitable for interior
decorating (ceiling, divider, etc.)
Limitation: This model is easy to climb.
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"J" by Atlantis Products, Inc., Tel. 800-708-2526. 4 7/8"x 5
3/16" (125x130) mesh, 31/32"x 1/8" (25x3) main bar,
3/16" (5) cross rod. Galvanized to ASTM A 123 and/or polyester
powder coated.
Grigliato
"K"
Characteristics: Square mesh style. Very sturdy and hard to climb.
Clean lines.
Applications: Fencing and railing. Very versatile for commercial
and residential use. Suitable for decorative applications (screens,
dropped ceilings) as well as for railing applications
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"K" by Atlantis Products, Inc., Tel. 800-708-2526. 1 21/32"x
5 3/16" (40X130) mesh, 31/32"x 1/8" (25x3) main bar,
3/16" (5) cross rod. Galvanized to ASTM A 123 and/or polyester
powder coated.
Grigliato
"L"
Characteristics: Square mesh style. Very sturdy and hard to climb.
Clean lines.
Applications: Fencing and railing. Very versatile for commercial
and residential use. Suitable for decorative applications (screens,
dropped ceilings) as well as for railing applications.
Specify: Electro-forged welded steel panel. Type Metalco Grigliato
"L" by Atlantis Products, Inc., Tel. 800-708-2526. 1 21/32"x
1 3/4" (40x45) mesh, 31/32"x 1/8" (25x3) main bar,
3/16" (5) cross rod. Galvanized to ASTM A 123 and/or polyester
powder coated.
( )
denotes metric
Curved Panels
All Grigliato panels are available in a curved design. The minimum
radius that can be rolled is 8'-0". The radius would be perpendicular
to the steel bar.
AI-ASSEMBLY,
INSTALLATION
Posts can be attached to the structure below in several ways: Using
the recessed method, posts are set into cored holes or sleeves and
anchored with non-shrink grout.
Using the surface mount method, mounting plates attached to each
post are expansion bolted to the structure below.
In the face mount method, the railing posts are mounted to the face
of the structure typically below the level of the walking surface.
MF-MATERIALS,
FINISHES
Thermosetting Polyester Powder Finish
Metalco Fence and railing panels are protected by what we believe
is the best finish available today. The computer controlled hot-dip
galvanizing and the thermosetting polyester powder finish give the
Metalco System the highest possible protection against rust and
corrosion.
The advanced polyester powder coating technology is environmentally
friendly (no solvents, lead free) and offers a large color selection.
Colors
Eight standard colors are available: white, black, blue, green,
red, yellow, gray and brown. Additionally, we offer an almost unlimited
selection of custom colors. The polyester powder coating is available
for all our products including oversized parts, i.e. large gates.
10-Year
Limited Warranty
Metalco fencing systems are free from defects in material and workmanship.
The hot-dip galvanized coating can leave minor impurities on the
treated surface, i.e., flashing, drips, drops, etc. These do not
impair the coating in terms of corrosion resistance. The polyester
coated galvanized metal is guaranteed not to rust, crack, peel or
blister for a period of 10 years. Accidental damages, defects resulting
from improper installation and damage from vandalism or abuse are
not included. Warranty is limited to a prorated value of the coating,
not to exceed the original value of the coating.
|
|
For a
detailed warranty certificate click on the PDF button. |
TD-TECHNICAL
DATA
Applicable Standards:
Material: Bar Stock: ASTM A 36, Tube: ASTM A 500-Grade B
Fabrication: ANSI/AWS D1.1
Hot-Dip Galvanized: ASTM A 123
Cadmium Plating: ANSI/ASTM A 165-71, Type NS with a clear chromate
finish
Powder Coating: Hardness ASTM D 3363; Direct impact ASTM D 2793.
Salt spray resistance test ASTM B 117, Weatherability ASTM D822
In the interest of improving quality and design, Atlantis Products, Inc. reserves
the right to change specifications without prior notice.
CC-CODES,
CERTIFICATIONS
The installed system can be designed to be capable of withstanding
1) a concentrated load of 200 lbs. applied at any point in any direction
2) a uniform load of 50 lbs. per linear ft. applied horizontally
and concurrently with uniform load of 100 lbs. Per linear ft. applied
vertically downward. The infill area of the guardrail system is
capable of withstanding a horizontal concentrated load of 200 lbs.
applied to 1 sq. ft. at any point in the system.
AC-AVAILABILITY,
COST
Availability: Metalco fencing is carried in stock in large mats
or prefabricated panels. Jobs are fabricated and coated before being
shipped throughout the United States. Cost: Costs are quoted on
a per-job basis due to varying requirements of each project. Costs
may be obtained by calling:
TEL:
630-971-9680, Toll Free: 877-638-2526
FAX 630-971-9860
WEB SITE: www.metalco.us
E-MAIL: info@metalco.tv
OM-OPERATION,
MAINTENANCE
The advanced coating method supplied on the Metalco fencing systems
requires no maintenance.
|
